Turning the System On in Motion Off/Instant Mode
1. Close all of the doors and windows, and make sure that the
message window reads READY or the READY light is lit
(if not, see page 16).
2. Press the ON key.
3. Press the MOTION OFF key.
4. Press the INSTANT key.
The ON light turns on. The Premium keypad reads ON, MOTION
OFF and INSTANT. The Standard keypad’s ON, MOTION OFF and
INSTANT lights are lit.
Do not leave the building or open any protected windows
without first turning the system off.
1. Close all of the doors and windows, and make sure that the
message window reads READY or the READY light is lit (if not,
see page 16).
2. Press the ON key.
3. Press the INSTANT key.
The ON light turns on. The Premium keypad reads ALL ON,
INSTANT. On the Standard keypad , the INSTANT light turns on.
Do not leave the building, open any protected windows or
move in front of the motion detector without first turning the
system off.
Turning the System On in Instant Mode
15
MOTION
OFF
INSTANT
INSTANT
To Next Page
Loading...
Need help?
General
