ADT BHS-4000A - Deleting Existing Keypad Codes

Delete a Keypad Code
If you wish to delete a keypad code:
AUX CODE
KEYPAD CODE
USER NUMBER USER NUMBER
KEYPAD CODE
AUXILIARY CODES
ENTER KEYPAD
CODE
1. Press the OPTIONS key.
2. Press the 3 key. The
ENTER CODE light blinks.
3. Enter the keypad code.
The keypad beeps.
The ENTER USER #
light blinks.
4. Enter the number of
the user whose code
you wish to delete. The
keypad beeps. The
ENTER CODE light
blinks.
5. Do not enter the
keypad code. Instead,
press the CANCEL key.
The keypad beeps.
6. Test that the code
has been deleted by
attempting to turn the
system on and off
using the deleted code.
1. Press the OPTIONS
key until the message
window reads
AUXILIARY CODES,
ENTER KEYPAD CODE.
2. Enter the keypad code.
The keypad beeps. The
message window reads
ENTER USER #.
3. Enter the number of
the user whose code
you wish to delete.
The keypad beeps.
The window reads
ENTER NEW CODE.
4. Do not enter the
keypad code. Instead,
press the CANCEL key.
The keypad beeps.
5. Test that the code
has been deleted by
attempting to turn the
system on and off
using the deleted code.
24
Premium Keypad
Standard Keypad