Using GoTo (Optional Feature)
The GoTo feature is only available in systems with multiple areas, and either of the two Premium keypads. The GoTo
feature allows for remote operation of a different keypad assigned to another area. When activated, the keypad will
function as the designated remote keypad.
30
AREA # ENTER
KEYPAD CODE
AREA # ENTER
1. Press the OPTIONS key until the message window reads
AREA # ENTER KEYPAD CODE. The current area number
will be shown at the top left portion of the display.
2. Enter the keypad code for the area you are in.
The message window reads AREA # ENTER.
3. Enter the number of the area to which you want to go, and
the keypad will then behave as if it were the keypad in that
area. The keypad will only display the status of that area at
this point. That area can only be accessed using a keypad
code that is valid in that area.
4. Twenty seconds after the last key press, the system and
keypad return to their original state.
To Next Page
Loading...
Need help?
General
