ADT BHS-4000A User Manual

1. Press the OPTIONS key.
2. Press the 2 key.
The ENTER CODE
light blinks.
3. Enter your keypad code.
The keypad beeps. The
READY and the CHIME
lights turn on while the
chime feature is on.
1. Press the OPTIONS key.
2. Press the 2 key. The
ENTER CODE light
blinks.
3. Enter your keypad code.
The keypad beeps. The
lights of the zones that
were last in alarm blink.
1. Press the OPTIONS
key until the message
window reads DOOR
CHIME, ENTER CODE.
2. Enter your keypad code.
The keypad beeps. The
message window reads
READY, DOOR CHIME.
1. Press the OPTIONS
key until the message
window reads ALARM
MEMORY, ENTER CODE.
2. Enter your keypad code.
The keypad beeps. The
message window shows
which zones were in
alarm.
22
Standard Keypad
Premium Keypad
Premium KeypadStandard Keypad
Turn the Door Chime On or Off
When you turn the door chime on, the keypad beeps if a protected door or window is opened
while the system is turned off. To turn the chime on or off:
Note: If you turn the door chime on and the keypad does not beep, the chime feature
may have been turned off at installation. To have the feature turned on, please call
Customer Care for assistance.
View Alarm Memory
You can use alarm memory to determine which zones have recently been in alarm.

ADT BHS-4000A Specifications

General

Brand	ADT
Model	BHS-4000A
Category	Security System
Language	English