1. Press the OPTIONS key.
2. Press the 7 key.
3. Observe which zone
number is displayed.
This is the zone that is
not ready.
4. Refer to the Pop-Up Zone
Card to verify the location
of the zone.
5. If the zone is a door or
window, make sure that
it is securely closed.
6. If the READY light turns on,
conduct the test.
7. If the READY light does
not turn on, call Customer
Care at 800.445.0872
for assistance.
1. Observe which zone
number is displayed. This is
the zone that is not ready.
2. Refer to the Pop-Up Zone
Card to verify the location
of the zone.
3. If the zone is a door or
window, make sure that
it is securely closed.
4. If the message window
now reads READY, conduct
the test.
5. If the message window
still reads NOT READY,
call Customer Care at
800.445.0872 for
assistance.
Standard Keypad
Premium Keypad
Testing With Not Ready Zones
If the system is not ready to test, the message window reads NOT READY, or the READY light is off. Do the following:
READY
29
To Next Page
Loading...
Need help?
General
