*Note: The keypad does not beep if the chime feature has been turned off by the installer.
1. Close all doors and win-
dows.Make sure that the
READY light is on. (If it is
not, see page 29.)
2. Press the OPTIONS key.
3. Press the 2 key.
4. Enter your keypad code.
The READY and the CHIME
lights turn on.
5. Open each protected door
and window. Listen for the
keypad to beep.*
6. If you do not hear the
keypad beep, note the zone
number and call Customer
Care at 800.445.0872.
7. When you have finished
testing, end the test by
repeating steps 2, 3 and 4.
1. Close all doors and
windows. Make sure the
message window reads
READY. (If it does not, see
page 29.)
2. Press the OPTIONS key until
the message window reads
DOOR CHIME.
3. Enter your keypad code.
The message window reads
READY DOOR CHIME.
4. Open each protected door
and window. Listen for the
keypad to beep.*
5. If you do not hear the
keypad beep, note the zone
number and call Customer
Care at 800.445.0872.
6. When you have finished
testing, end the test by
repeating steps 2 and 3.
28
Standard Keypad
Premium Keypad
To Next Page
Loading...
