Adtech NCT-04 - Relocation Setup and Operation

NCT-04/03/02 Punch CNC System (Commissioning Manual)
Emergency
stop
P5.009 P1.056 ---
STOP
3.6 Relocation Setup and Operation
3.6.1 Relocation Process
3.6.2 Related Port Settings
Function Parameter Remark
Relocation cylinder output control port P5.029 Connect relocation cylinder
Positioning cylinder compression test
port
P5.030 Check whether positioning
cylinder is pressed down
Positioning cylinder release detection
port
P5.031 Check whether the positioning
cylinder is lifted
Relocation clamp backward distance P1.097