Advanced Control C220 Series - Page 19

Product Information
C220/C420 General Flux Vector Control Inverter User Manual
18
Item
Specifications
Auxiliary
frequency
source
There are ten types of auxiliary frequency sources. It
can
implement micro tuning and synthesis of auxiliary
frequency.
Input terminal
There are four digital input terminals. It can be
compatible with active PNP or NPN input mode.
There are two analog input terminals,
one of which
can be used only as voltage input,
while the other can
be used as voltage or current input. (It can expand
one voltage input terminal)
Output terminal
One digital output terminal
One relay output terminal
One analog output terminal,
with optional 0/4mA to
20mA or 0/2V to 10V. It can realize the output of
such physical parameters as setting frequency and
output frequency.
Display
and
Keyboar
d
Operatio
n
LED display
The machine has the LED keyboard, and realize
parameter settings, status monitoring function.
Parameter Copy
Keyboard can be copied using the parameters to
achieve the rapid replication parameter.
Others
Protection
function
It can implement power-on motor short-circuit
detection,
inpu
t/output phase loss protection, over current
protection,
over voltage protection, under voltage protection,
overheating protection and overload protection.
Accessories LCD Operation Panel.
E
n
v
i
r
Using place
Indoor, and be free from direct sunlight, dust,
corrosive gas, combustible gas, oil smoke, vapor, drip
or salt.
Altitude 1000m, derated when above 1000m