Advanced Control C220 Series - Automatic Tuning of Motor Parameters

Operation and Display
C220/C420 General Flux Vector Control Inverter User Manual
53
Parameter can not
be viewed
Please enter pass
word
Return
monitor？
Start
End
Y
N
Pass word enter
successful
Err26
（Wrong password
three times ）
Fig.4-7: password cancel process
4.5 Automatic Tuning of Motor Parameters
To select the vector control running mode ,it must input the nameplate
parameter of the motor accurately prior to the running of inverter, The
C220/C420inverter will select standard motor parameters matching the nameplate
parameter; depending on the motor parameters ,the vector control mode must
acquire the accurate parameters of the controlled motor to ensure the good control
performance