Advanced Control C220 Series - Page 18

Product Information
C220/C420 General Flux Vector Control Inverter User Manual
17
Item
Specifications
Built-in PID
It is easy to realize process-controlled close loop
control
system.
（
AVR
）
Auto
voltage regulation
It can keep constant output voltage automatically in
case of change of mains voltage.
Individu
alized
function
Peripherals
self-detection upon
power-on
It can conduct safety detections on the peripherals
upon power-
on, including earth and short circuit
detections.
Shared DC bus
function
It can realize the function that multiple inverters share
the DC bus.
JOG key
Programmable key: Select the command channel
switching/forward and reverse rotations/jog operation.
Textile swing
frequency control
Multiple triangular-wave frequency control
function.
CBC Function
Built-CBC algorithm to reduce the probability of
over-
current converter reported to improve the
whole anti-jamming capability.
Timing control
Timing control function: Setting time range
between 0h to 65535h.
Run
Running command
channel
Three types of channels: operation panel reference,
control
terminal reference and serial communication port
reference. These channels can be switched in various
modes.
Frequency source
There are totally ten types of frequency sources, such
as
digital reference, analog voltage reference, analog
current
reference, MS speed, PLC, PID, and serial port
reference.