Advanced Electronics Mx-5000 Series - Delays; Turn Off Delay Mode; Turn On Delay Mode

Page 32 of 42
3.12 Delays
[Level 2 Menu] User 1 Node 1
VIEW DISABLE ENABLE
TEST DELAY TOOLS
STATUS
Press the ÏÐÍÎ buttons to highlight the Delay-Mode option and then press the  button to select
it. If the current User ID does not have the necessary permission, the display prompts for entry of a
password to guard against inadvertent changes.
If the delays are configured in the panel, the display shows the following pop-up window when the
Delay-Mode Option is selected. (Note: This delay function can only be configured using the PC
Programming Tool).
NO INVESTIGATION DELAY
ONCE ONLY
AUTOMATIC
EXTENDED ↓
If the delays are not configured in the panel, the display briefly shows “NOT CONFIGURED” before
returning to the Disable Menu Options.
3.12.1 Turn Off Delay Mode
This operation will cancel the Investigation Delay mode.
With the option highlighted, press the  button to select NO INVESTIGATION DELAYS and disable
the operation of the Stage 1 / Stage 2 Investigation Function. Otherwise, press the ESC to cancel
and keep the investigation delays in operation.
If the investigation delays are in operation then the “Delayed” LED Indicator is illuminated. When the
investigation delays are turned off, the “Delayed” LED Indicator is turned off.
Press ‘Esc’ to cancel and make no change to the current operational setting.
3.12.2 Turn On Delay-Mode
This option allows the operation of Investigation Delays and other related functions.
The Investigation Delays can be invoked as manual operation delays (Once Only), Automatic delays
(configured to run with a time clock) and Extend delays. A further option is provided to Inhibit delays
for holiday periods. The options that appear in the menu depend on the installation configuration
programmed by the installer.
On selection of the DELAY option, the display will show a pop-up menu list. For example:
NO INVESTIGATION DELAY
ONCE ONLY .
AUTOMATIC
EXTENDED ↓
Press the ÏÐ buttons to scroll through and highlight the required option and then press the 
button to enable it.
The display will confirm the selection and indicate WORKING whilst it performs the operation. On
completion, it reverts to the pop-up menu.
For Extended and Holiday/Inhibit, further menus are presented.