How to fix 'Out of range Low' error on Advanced Instruments OsmoTECH XT?
If the Advanced Instruments Medical Equipment displays an 'Out of range Low' error, it could be due to particulate matter in the sample, so check for it. Also, verify that the range setting (High Range or Low Range) is appropriate for the sample you're testing. Testing a control like Clinitrol can also help diagnose the issue.
What to do if Advanced Instruments Medical Equipment shows 'Out of range High'?
If you're seeing an 'Out of range High' error on your Advanced Instruments Medical Equipment, first, ensure the sample is present in the sampler. You might also need to test the solenoid. Cleaning the sample probe can also resolve this issue. As a diagnostic step, try testing a control like Clinitrol to see if the problem persists.
Why does Advanced Instruments OsmoTECH XT show 'Test timeout'?
If your Advanced Instruments Medical Equipment shows a 'Test timeout' error, it means the test couldn't finish in time. Start by checking the sample for any particulate matter. Testing a control such as Clinitrol can help determine if the issue persists. If it does, the sample might be outside the instrument's range.
What to do if Advanced Instruments OsmoTECH XT says 'Sample did not freeze'?
If the Advanced Instruments Medical Equipment indicates that the sample did not freeze, it might have frozen prematurely. Try re-running a new sample using a known control like Clinitrol. Also, check the sample for particulate matter. Cleaning the sample probe with a chamber cleaner dampened with water or a cleaning solution for protein removal may also help.
How to resolve 'AI consumable box not detected' on Advanced Instruments OsmoTECH XT Medical Equipment?
If the Advanced Instruments Medical Equipment isn't detecting the AI consumable box, make sure a test kit is placed on the instrument and that the printer door is closed.
How to fix 'Printer offline' error on Advanced Instruments Medical Equipment?
If the Advanced Instruments Medical Equipment printer is offline, try replacing the printer paper or connecting the printer.
General| Brand | Advanced Instruments |
|---|---|
| Model | OsmoTECH XT |
| Category | Medical Equipment |
| Language | English |
To Next Page
