Advanced Instruments OsmoTECH XT - Setting Up Networking Communications

Chapter 5 Configuring settings
OsmoTECH XT Single-Sample Micro-Osmometer Service Guide
33
3. Select the format(s) (PDF and/or CSV) of the
exported data file(s).
If both format are selected then a file in each format
is exported.
4. Select the location of the exported data.
• To save the data to a USB drive, select USB and
insert a USB drive into the instrument’s USB port.
Exported files are saved to the Advanced
Instruments>Export folder automatically created
on the USB drive.
• To save the data to a network folder:
a. Select Network.
b. Press FOLDER.
c. If a network folder has already been configured
for another data management function such as
database import or backup, press to
select a folder configuration to copy to the
Export Folder screen.
Otherwise, enter the network folder settings
using the keyboards ( ).
d. Press TEST to verify that the instrument can
access the folder.
NOTE: Contact your network administrator if the
instrument cannot access the folder over the
network.
e. Press SAVE and then EXIT.
5. Select the Require LOGIN for EXPORT checkbox to
require the selected users to login before exporting
data.
6. Press SAV E .
Exporting data manually
To export a database to the configured location (USB or
network folder) as a CSV file, complete the following
steps.
1. Select the database table to export (Results, Users,
Events, or Controls.
2. Press EXPORT.
If exporting to a USB drive, exported files are saved
to the Advanced Instruments>Export folder
automatically created on the USB drive.
Repeat these steps for each database table you want to
export.
Backing up the database
1. Press the DATABASE BACKUP tab.
2. Select the location (USB or Network) for the
exported data.