19
ORIGINAL INSTRUCTIONS | ADVANCED | 01.2022 | 1002021-01 www.advanced.tech
Drive
NOTE
Risk of damage
Incorrect handling can damage the belt. Some damage
(e.g. torn carbon fibres inside the belt) is not visible from
the outside, but it can cause the belt to lose tensile
strength and/or tear.
f Do not kink, bend, twist, lace, turn upside down or use
as a belt whip.
f Do not force the belt onto or off the pulley. The belt
must be placed on the pulley without tension; the belt
tension is only established after it has been placed on
the pulley.
f Do not handle sharp-edged objects or tools on the
belt.
f Do not oil or grease the belt drive.
f Do not open or mend straps.
f Never stand on the belt. Do not allow any external
load to act on the belt (e.g. when the e-bike is parked).
f Never hold the e-bike by the belt.
f Have the belt replaced if it no longer runs securely on
the pulley.
Abb.: 6 Pictograms of belt handling
To Next Page
Loading...
General