Planning Your Application Program
ADAM5KTCP_SendReceiveUDPCmd
Chapter 6
Description: Sends a command to ADAM-5000/TCP and receives
the response by UDP
Syntax: int
ADAM5KTCP_SendReceiveUDPCmd(char
szIP[], char szSend[], char szReceive[]);
Parameters:
szIP[in]: the IP Address of the ADAM-5000/TCP that send/
receive the command/response
szSend[in]: the string in ASCII format that send to the ADAM-
5000/TCP
szReceive[out]: the string in ASCII format that response from the
ADAM-5000/TCP
ADAM-5000/TCP User’s Manual
6-29
To Next Page
Loading...
