Advantech FWA-1112VC - Booting from Network Via Pxe

FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved.
Page 35
2.2 Booting from network via PXE
To boot an OS via network, please make sure the following BIOS options In the Advanced:
Network Stack Configuration Menu are configured properly:
Table 1 PXE BIOS Options
Network Stack
Enabled
Enables the UEFI Network Stack.
Below are the steps to enable PXE boot.
1. It needs to set BIOS/Post & Boot -> Network Stack as enabled (default setting is
disabled)
Figure 34 Enable PXE boot_1.