CONDOR A22 User Manual
11 | P a g e
2023 All Rights Reserved V1.2
Status Indicator Description
System Status: Normal LED Colours
Powering On Only Front LEDs are on White
Warming Up Flashing Rear LED’s Alternating Blue, Green and
Red
GPS Mode Solid Green(ready to fly)
Manual Mode Solid Yellow
Calibrating Slow Flash Flashes yellow, then Green
and then solid Green
indicates success
Successful Calibration Solid Relevant flight mode colour
System Status: Warning LED Colours
Compass Calibration required
Flashing Alternating Red and Yellow
Link Loss Flashing Yellow
Low Battery(38% remaining) Slow Flash All four LEDs flash red,
Remote Controller beeps
continuously (UAV will auto
RTH in 30 seconds)
Critical Low Battery(33%) Fast Flashing All Four LEDs flash rapidly,
Remote Controller Beeps
faster(the UAV will auto RTH
in 5seconds)
System or Battery Error Flash Front and Rear LEDs flash
alternating red
In low power warnings, the remote controller will beep.
During all warnings, the system status will be indicated with text or an icon on the remote-control
screen.
Return to Home
The return-to-home function on the UAV will make the aircraft fly back to the recorded home
point. Three scenarios would cause the aircraft to do so:
1. Manual RTH
2. Low Battery
3. Fail-safe RTH
CAUTION: The recorded home point is the point where the aircraft took off from.
To Next Page
Loading...
