CONDOR A22 User Manual
6 | P a g e
2023 All Rights Reserved
V1.2
Introduction
The Condor A22 is a purpose-built fishing drone with an onboard NEWTON 3 release
mechanism. This drone is fitted with the latest flight control platform and software to ensure the
safety and performance of the drone.
Features
CONDOR A22: This is a hi-tech electronic product equipped with an advanced intelligent flight
control system with multiple fail-safes built in.
Newton 3 release: The Patented Newton 3 release can carry loads of up to 450 grams and either
use mechanical release or tension release to drop your baited hooks.
Smart UAV Battery: The Condor battery is an 11.1V, 6,800mAh smart battery with charging and
discharging management functions.
Preparation for Flight
Charge both the Remote controller and the UAV battery before the first flight. Always take off
with sufficient charge in both batteries.
Battery Installation
Slide the battery into the slot until the highlighted latch blocks the battery.
Pull the latch to the unlocked position and push the battery in until it is firmly seated.
Check latch is seated by audibly clicking into the locked position.
To Next Page
Loading...
