CONDOR A22 User Manual
8 | P a g e
2023 All Rights Reserved
V1.2
After a propeller is carefully wound onto the motor, hold the motor while turning the propeller to
lightly finger tighten.
Observe the arrow with the lock and unlock symbol to help with attaching and removing the
propellers in the correct direction.
CAUTION: Be careful to not cut your hand as the blades can be sharp. The motors will be hot to
the touch after flight, this is normal. Let them cool before removing the propellers.
Check that all propellers are secure before each flight.
Preparing the Remote Controller
Lift the antennas up vertically.
To Next Page
Loading...
