59
aee.com
Precautions for The Waterproof Housing
The waterproof housing is a precision component. When using the
waterproof housing, adhere to the following precautions:
1. Do not randomly remove or change the O-ring, key, and lens
cover. Otherwise, the waterproof performance deteriorates.
2. Do not put the waterproof housing in a place where corrosive
gases are easily generated due to strong acid or alkali. Do not
make the waterproof housing in contact with chemical or corrosive
objects, such as strong acid or alkali.
3. Do not put the waterproof housing in a place where temperature is
high (50°C) or low (-10°C) for a long time to avoid deformation.
4. Do not expose the video camera to sunshine for a long time to
avoid deterioration of the waterproof performance.
5. Before use, ensure that the O-ring is intact, the seal is litter-free,
the housing is fully sealed, and the buckle is tight.
6. After using the housing in sea water, wash it using fresh water,
clean it, and dry it in a cool place.
To Next Page
Loading...
