47
aee.com
Startup
Long hold the " " key for about 5s to start up the Wi-Fi based
remote control.
After startup, the red power indicator will stay on and the screen will
display the battery icon " " and ver; if the battery icon " ", it
indicates that the battery level is low and charging is needed; please
connect the USB power supply to the USB port of the remote control
for charging.
Pairing
Before use of the remote control, please rst pair it with the camera
according to the following steps:
1. Turn on the main unit, and enable its Wi-Fi function;
2. First press and hold the " " key on the
remote control; then long press the " " key
for about 5s to turn on the device; when "WAIT
HOST PBC" appears on the remote control
screen, release these two keys;
WiFi
WAIT HOST PBC
To Next Page
Loading...
