AEQ BC-2500
Radio Broadcast Mixing Desk
11
4.2. Initial Configuration
The AEQ BC-2500 audio mixer is supplied with two basic configurations:
BC-2500 FM-AUTOCONTROL
1 BC-2501FM Chassis with capacity for 24/20 modules, with audio meters and PFL
monitor loudspeakers.
1 BC-2578 Control, monitor and “intercom” module for controller and announcer.
(occupies three module space)
2 BC-2511 Micro/line mono input module.
5 BC-2522 Double switchable stereo input module.
1 BC-2533 External hybrid telephone input/output and control module.
2 BC-2560-A Stereo plus added mono output module.
7 BC-2502 Blank module.
1 BC-2523 External power supply module.
(This module does not occupy chassis space)
BC-2500 FM ANNOUNCER-CONTROL
1 BC-2501FM Chassis with capacity for 24/20 modules, with audio meters and PFL
monitor loudspeakers.
1 BC-2578 Control, monitor and “intercom” module for controller and announcer.
2 BC-2511 Micro/line mono input module.
6 BC-2522 Double switchable stereo input module.
2 BC-2533 External hybrid telephone input/output and control module.
2 BC-2560-A Stereo plus added mono output module.
3 BC-2502 Blank module. (This module does not occupy chassis space)
1 BC-2523 External power supply module.
Other configurations are available on demand, only limited by the spatial capacity of the
chassis. The minimum functional requirement is the inclusion of one BC-2501 or BC-2501FM
module, one BC-2578 module, one input and one output module, an external power supply and
blanking plates to complete the chassis.
To Next Page
Loading...
Need help?
General
