AEQ BC-2500 User Manual

AEQ BC-2500
Radio Broadcast Mixing Desk
28
5.7.1.2. Studio Monitor Block
This unit controls the sends to the principal studio monitor outputs together with the
primary and secondary headphone circuits.
The following signals can be monitored:
- Master 1, by selecting (1) MASTER 1
- Master 2, by selecting (2) MASTER 2
- Auxiliary 1, by selecting (3) AUX.1
- Auxiliary 2, by selecting (4) AUX.2
- External Input 1, by selecting (5) EXT.1
- External input 2, by selecting (6) EXT.2
- Pre-listen, by selecting (7) PFL
The level of the signal or signals selected for monitoring is adjusted by the potentiometer
(8) MONITOR LEVEL.
Note: This monitor is disconnected when a BC-2511 module is activated in MICRO
position and programmed to operate in studio area.
The output connector for the primary headphones is situated at the rear connector of the
module; the output level is adjusted with the potentiometer (9) H/PHONES 1
The output connector for the secondary headphones is situated at the rear connector of
the module; the output level is adjusted with the potentiometer (10) H/PHONES 1

AEQ BC-2500 Specifications

General

Brand	AEQ
Model	BC-2500
Category	Music Mixer
Language	English