To Next Page

To Previous Page

AEQ BC-2500

Radio Broadcast Mixing Desk

5.5. BC-2560-A STEREOPHONIC + SUM MONOPHONIC OUTPUT MODULE

5.5.1. Functional description

The Stereophonic + Sum Monophonic BC-2560-A output module combines all the signal

inputs it receives.

The BC-2560-A can be programmed for connection to any of the output buses: Master 1,

Master 2, Auxiliary 1 and Auxiliary 2. This operation is performed during manufacturate. To alter

this specification consult section 7. It should be noted that two BC-2560-A/C modules must

never be connected to the same bus.

The output level is controlled by the slide fader (1). The monophonic output at connector

(2) MONO OUTPUT, together with the stereo output at connector (3) OUTPUT (L) and (4)

OUTPUT (R) corresponding to the left and rigth channels respectively are delivered to the output.

Questions and Answers:

Need help?

Do you have a question about the AEQ BC-2500 and is the answer not in the manual?

AEQ BC-2500 Specifications

General