AERMEC WRC User Manual

23
Set the ENERGY SAVING function (active on indoor unit):
This mode is available for heat and cool operations (in the first instance a minimum set is defined, while in the latter case a
maximum set is defined as the setpoint limits beyond which it will not be possible to operate the machine); to see this function
(with the unit ON), perform the following operations:
(1) Press the “FUNCTION” key until the Energy Saving icon appears ( ); at this stage, the selected icon will begin to flash;
additionally, the wording “MIN” will be displayed when setting energy saving during cooling mode or “MAX” when setting a
value during heating mode;
(2) press the buttons ( ) or ( ) to set a maximum or minimum value (in relation to the active operating mode) to be used
as the limit for the operating setpoint;
(3) press the “ENTER/CANCEL” button again to activate the selected function;
(1) (2)
(3)
WARNING: to disacvate this funcon,
press the “FUNCTION” buon unl the
funcon to be cancelled is selected and then
press the “ENTER/CANCEL“ buon
Set MINIMUM
(cooling mode)

AERMEC WRC Specifications

General

Brand	AERMEC
Model	WRC
Category	Air Conditioner
Language	English