AERMEC WRC - Set the X-FAN function on indoor unit

25
Set the X-FAN function on indoor unit:
This function is used to dry the coil (only during cool and dehumidification modes) if the unit is switched off before reaching the
desired setpoint, in order to avoid the formation of mould or bacteria on the coil; to activate or de-activate this function, perform
the following operations:
(1) Press the “FUNCTION” key until the icon for this function appears ( ); at this stage, the selected icon will begin to
flash, thereby indicating that the function has been selected;
(2) press the “ENTER/CANCEL” button again to activate the selected function;
(1) (2)
WARNING: to disacvate this funcon,
press the “FUNCTION” buon unl the
funcon to be cancelled is selected and then
press the “ENTER/CANCEL“ buon