Aeroflex 3920 - Appendix F; Optional Test Systems and Functions

Subject to Export Control, see Cover Page for details.
F-1
Appendix F
Optional Test Systems and Functions
The following are Optional Systems currently available for the 3900 Series:
System Features Provided Option # Special Notes
Site Monitoring Provides the ability to continuously
monitor and log a radio system’s
receiver performance, including
SINAD sensitivity and spectrum
analysis.
390XOPT051
DMM (Digital
Multimeter)
DMM provides the ability to perform
AC and DC amplitude and voltage
measurements as well as Ohm
measurements.
390XOPT053
IQ Gen Provides users with the ability to
download and modulate IQCreator®
waveform files to the 3900.
390XOPT054
Audio Analyzer Provides the ability to evaluate the
audio frequency band of a
demodulated or externally input
signal.
390XOPT055
Frequency 3920
Extension
Extends upper frequency range of
3920 Test Set to 2.7 GHz.
390XOPT058 Only applicable to 3920
Harmonics &
Spurious
Measurements
Allows user to sweep a radio’s
transmitter and display the current
fundamental transmit frequency and
the level for the fundamental, second
and third harmonic frequencies.
390XOPT060 Only available for Analog
Duplex system.
Transmitter level must
be +20 dBm or higher.
Tracking
Generator
The Tracking Generator generates a
carrier wave that is applied to
components or systems, which allows
the output to be analyzed to evaluate
the frequency response of the device
under test.
390XOPT061
TETRA MS Provides features for testing most
functions of TETRA Mobile Stations
(hand sets).
390XOPT110
TETRA MS T1 Provides features for testing RF
aspects of TETRA Mobile Stations
(hand sets) using the TETRA T1 Test
facility.
Included with TETRA MS
Option
TETRA BS Provides features for testing TETRA
Base Station transmitters.
390XOPT111
TETRA BS T1 Provides features for testing RF
aspects of TETRA Base Station
transceivers using the TETRA T1 Test
facility.
Included with TETRA BS
T1 Option