Delete ALL automatic trigger times.
Clock Sync - Auto Time Calibration after Power Fail
X=telephone number of SIM inside the intercom.
Summer Daylight Auto Correct
?? = number of days between SMS calibration SMS should
be sent. 0 = no message sending.
Do Not Disturb (push button de-activated during set times)
ON = activated. OFF = de-activated.
9999#
21#day,day,day
#time1,time2#
Enter all active days during which button should operate.
Enter start and end time button should operate
(24 hr format, no colon. E.G 8:30am = 0830)
Alternate Number to Call During Do Not Disturb Times.
X = button number (1-9. Enter 1 for 1 button system. Enter 0
for button 10)
???? = Alternative phone number to call out of hours.
Send with passcode string to clear all programming.