AGFA CR 75.0 - Page 68

68
2241A EN 20040210
The CR 75.0 will display:
11 Wait until the CR 75.0 displays:
You must make backup files with the new parameters.
12 Insert an empty formatted floppy into the disk drive and press the Confirm key.
The CR 75.0 will start copying the machine specific configuration data while
displaying the Save configuration screen:
Initializing new
station name . . .
INSTALL
CONFIGURATION
SERVICE XXXXX
Configuration installed.
Parameters have changed.
You should refresh your
backup now.
Please insert the backup
floppy and press
: quit
: ok
INSTALL
CONFIGURATION
SERVICE XXXXX
copying . . .
D:\ACP_<serial#>.zip
to
A:<path><file name>
SAVE
CONFIGURATION
SERVICE XXXXX