AgfaPhoto Compact 104 - Initial Settings; Turning the Power On and Off; Camera Modes

AgfaPhoto Compact 104
12
Turning the Power On and Off
There are two ways to turn on the camera:
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends
and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 12 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your
camera. First is the setup of language menu. Specify in which language menus and messages are to be
displayed on the LCD monitor.
Setting the Language
1. Press , , or to move through the selection.
2. Select a language, and then press SET to apply.
Setting the Date & Time
1. Press or to move through the selection.
2. Press or keys to change the value for the date and time.
3. Press SET to apply.
4. If necessary, press to close the menu.
Now, you are ready to start taking images and videos.
Holding down the or keys to change the values continuously.
Modes
Your camera has two modes:
Record Mode
This is the default mode while you turn on the camera every time. You are able to take images
and record video/audio clips in this mode.
Playback Mode
Press the Playback button after the camera is turned on to view and edit captured
images or playback videos and audio clips. The recording of voice memo attached to images is
available in this mode.