Contents ▲ 189 ▼ Index
Loading the Cell Chip into the Bioanalyzer
The Agilent 2100 bioanalyzer uses different cartridges for electrophoretic and flow
cytometric assays. For flow cytometric measurements, the pressure cartridge is required.
The pressure cartridge contains a tubing and filter assembly that connect to the vacuum
pump. The seal has to match the priming well on the chip so that the required low
pressure can be built up. The pressure cartridge can be identified by the engraved
number “2” on the front.
NOTE
Any cartridges without engraved numbers are electrode cartridges.
To Next Page
Loading...
Need help?
General
