Contents ▲ 14 ▼ Index
Quick Start
The following step-by-step instructions guide you through a measurement with the
Agilent 2100 bioanalyzer.
Preparing the Agilent 2100 Bioanalyzer
1 Ensure that the proper cartridge is installed in the bioanalyzer. You can identify the
installed cartridge by the number engraved at the front.
c = Electrode Cartridge for electrophoretic assays
d = Pressure Cartridge for flow cytometric assays
Engraved number
Note that there are also electrode cartridges
without an engraved number.
To Next Page
Loading...
