Contents ▲ 82 ▼ Index
Data Analysis: DNA
The data analysis process for DNA assays consists of the following steps:
1. Raw data is read and stored by the system for all of the individual samples.
2. The data is filtered and the resulting electropherograms of all samples are plotted. You
can change the settings of the data analysis after the run and reanalyze your data.
3. Peaks are identified for all samples and are tabulated by peak ID. You can change the
settings of the peak find algorithm and reanalyze the data after the run has finished.
(Note that peak find settings can be changed for all or only certain samples.)
To Next Page
Loading...
