Agilent Technologies 240 Series AA - Page 56

Getting Started
56 Agilent 240/280 Series AA (including Zeeman)
5 Set the delivery pressure of the gases to the following:
Recommended
Permissible
kPa
psi
kPa
psi
Acetylene
75
11
65–100
9.5–14.5
Air
350
50
245–455
35–65
Nitrous oxide
350
50
245–455
35–65
6 Inspect the gas hoses for damage, replacing any damaged hoses. Turn on the
gas supplies to your instrument and test all hoses and connections for leaks.
If a leak is found, repair it immediately.
7 Load a worksheet and develop the method(s) as per your analytical
requirements.
8 Optimize the system.
9 Start an Autorun.
NOTE
Detailed procedural help for Steps 7 to 9 are provided in the Help. See Page 51 for
details of how to find information in the Help.