Introduction
Agilent Microwave Plasma Atomic Emission Spectrometers User’s Guide 17
2. Introduction
Site Preparation Requirements 17
User Documentation 17
Specifications 18
Site Preparation Requirements
Prior to receiving your Agilent MP-AES instrument, you will have
been provided with an Agilent MP-AES Site Preparation Guide,
which describes the environmental and operating requirements and
specifications of the MP-AES instrument. You must prepare your
laboratory according to these instructions and specifications before
the instrument can be installed. You should keep the site preparation
guide for future reference. If you have misplaced your copy, you can
obtain a replacement from your local Agilent office.
User Documentation
You have been provided with the following documentation to help
you set up and operate your MP-AES instrument:
The Agilent MP-AES Site Preparation Guide, with information on
how to set up your laboratory in preparation for the MP-AES
instrument.
This User’s Guide, with safety practices and hazards information,
instructions for finding information about installing and
maintaining the components of the MP-AES instrument and a
brief operation overview.
To Next Page
Loading...
Need help?
General
