Operation
42 Agilent Microwave Plasma Atomic Emission Spectrometers User’s Guide
8 Click Standards to enter the concentration of the elements in
your standards and select whether to use other options such as
Standard Additions or MultiCal.
9 Click IEC (if enabled) to enter the concentration of the elements
in your IEC standards.
10 Click Sequence to specify the end of run actions, number of
samples, select the solution type and edit the sample labels.
11 If you are using an autosampler, click the ‘Autosampler’ tab to
select the racks and probe depth (if needed). Depending on the
autosampler selected, options may vary.
NOTE
See the MP Expert Help for a more detailed description of setting up a method.
Running Samples
To run samples:
1 Click the Analysis tab and do the following:
a Ensure your samples are selected. This will be indicated by a
check next to the Rack:Tube column. To select all solutions,
select the checkbox next to the Rack:Tube title.
b Click the Run icon in the toolbar (or press the SHIFT+F8
keys) to begin the analysis, and follow the subsequent
prompts.
NOTE
For further information about running an analysis, refer to the MP Expert Help.
To Next Page
Loading...
Need help?
General
