Installation
28 Agilent Microwave Plasma Atomic Emission Spectrometers User’s Guide
Installing the MP Expert Software
Although the Agilent-trained, Agilent-qualified or Agilent-authorized
field service engineer will install the MP Expert software for you
during the installation process, you may need to install the software
yourself at some later stage, for example if you change the PC.
NOTE
Install the MP Expert Software first, and then plug the USB cable into the
computer.
To install the MP Expert software:
1 Log on to the instrument computer with Administrative rights.
2 Insert the MP Expert Software disk in your CD-ROM drive. The
software will automatically start
1
.
3 Follow the instructions on the screen.
4 Click Yes to restart the computer if prompted.
5 Plug the USB cable into the USB port on the MP-AES instrument
and then into a USB port on the computer.
6 Once installation is complete, you will need to register your
MP Expert Software. To start the MP Expert software, double-
click the MP Expert icon on your computer desktop. Complete
the Software Registration, if requested to do so, referring to the
Help if required.
TIP
To familiarize yourself with the MP Expert software, after installation, double-
click the MP Expert icon on your computer desktop. When the MP Expert Help
appears, click the How to link to view step-by-step instructions on how to use
the MP-AES instrument.
1
If you have turned off the auto-start capability of your CD-ROM drive, you will need to run the MPExpertSetup.exe file on
the disk.
To Next Page
Loading...
Need help?
General
