• HP 10791A ...................................................................... 3 meters (10 feet)
• HP 10791B ...................................................................... 7 meters (23 feet)
• HP 10791C ...................................................................... 20 meters (65 feet)
Figure 2-3
shows how to connect the HP 5517B to the HP 5501A system power supply and HP 10760A Counter
using the HP 10791A/B/C Cable. Figure 2-4 illustrates the cables use in connecting the HP 5517B to the HP 5501A
system power supply and the HP 10764C Fast Pulse Converter.
1-30. The HP 10793A/B/C Laser Head Cable is used to connect the HP 5517B to the HP 5527A Laser Position
Transducer System electronics. The difference between the A, B, and C models is their length.
• HP 10793A ...................................................................... 3 meters (10 feet)
• HP 10793B ...................................................................... 7 meters (23 feet)
• HP 10793C ...................................................................... 20 meters (65 feet)
Figure 2-5
shows how to connect the HP 5517B to the HP 5527A Laser Position Transducer System electronics (HP
5507A).
* IEC, International Electrotechnical Commission
** CFR, Code of Federal Regulations (U.S.A.)
To Next Page
Loading...
