6-57
SECTION VII MANUAL
CHANGES
7-1. INTRODUCTION
7-2. This section contains information necessary to adapt this manual to apply to older instruments. 7-3.
MANUAL CHANGES
7-4. This manual applies directly to HP 5517B Laser Heads with Serial Prefix 3014A and above and 5517C Laser
Heads with Serial Prefix 3002A and above..
7-5. As engineering changes are made, newer instruments may have higher serial prefix numbers than the one
shown on the title page of this manual. The manuals for these instruments will be supplied with MANUAL
CHANGES sheets containing the required information. Replace the affected pages or modify existing manual
information as directed in the MANUAL CHANCES pages. Contact the nearest Hewlett-Packard Sales and Support
Office (listed at the back of this manual) if the change information is missing.
7-6. OLDER INSTRUMENTS
7-7. To adapt this manual to older instruments having a serial prefix lower than 3014A for the 5517B or 3002A for
the 5517C perform the backdating that applies to your instruments serial prefix as listed in
Table 7-1.
Table 7-1. Manual Backdating
IF INSTRUMENT HAS SERIES NUMBER
OR BOARD DATE CODE
MAKE THE FOLLOWING CHANGE
TO YOUR MANUAL
ANY SATISFACTORY SUPPLIER
TEXAS INSTR INC-SEMICONDUCTOR
CMPNT DIV
MOTOROLA SEMICONDUCTOR
PRODUCTS
FAIRCHILD SEMICONDUCTOR DIV
CORNING GLASS WORKS COMPONENT
DIV
CORNING GLASS WORKS (BRADFORD)
NATIONAL SEMICONDUCTOR CORP
HEWLETT-PACKARD CO-CORPORATE HQ
BECKMAN INDUSTRIAL CORPORATION
DALE ELECTRONICS INCORPORATED
Table 6-5. Manufacturer's Code
List
To Next Page
Loading...
Need help?
General
