Agilent 81133A/81134A Pulse Generator User’s Guide, August 2002 7
Safety Requirements
The following general safety precautions must be observed during all
phases of operation of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of
the instrument.
Agilent Technologies Inc. assumes no liability for the customer's
failure to comply with these requirements.
Before operation, review the instrument and manual for safety
markings and instructions. You must follow these to ensure safe
operation and to maintain the instrument in safe condition.
Safety Summary
This product is a Safety Class 1 instrument (provided with a protective
earth terminal). The protective features of this product may be
impaired if it is used in a manner not specified in the operation
instructions.
All Light Emitting Diodes (LEDs) used in this product are Class 1
LEDs as per IEC 60825-1.
Environmental Conditions
This instrument is intended for indoor use in an installation category
II, pollution degree 2 environment. It is designed to operate within an
operating temperature range of 0 – 55 °C (32 – 130 °F) at a maximum
relative humidity of 95% and at altitudes of up to 2000 meters.
Refer to the specifications tables for the ac mains voltage
requirements and ambient operating temperature range.
To Next Page
Loading...
Need help?
General
