Need help?Do you have a question about the Agilent Technologies 8860 and is the answer not in the manual?
General| Type | Gas Chromatograph |
|---|---|
| Maximum Operating Temperature | 450°C |
| Oven Temperature Range | ambient +4°C to 450°C |
| Electronic Pneumatic Control (EPC) | Yes |
| Column Oven Temperature Range | ambient +4°C to 450°C |
| Maximum Temperature Ramp Rate | 120°C/min |
| Detectors | Up to 3 |
| Inlet Options | PTV |
| Detector Options | FID, TCD, ECD, NPD, MSD |
| Carrier Gas | Helium, Hydrogen, Nitrogen |
| Weight | 50 kg |
Alerts for hazards that could damage product or cause personal injury.
Explanation of safety symbols and general precautions for safe operation.
Guidelines for preparing the unit for shipping, cleaning, and disposal.
Details on the bag and cylinder versions of the Gas Sample Selector.
Detailed specifications for both bag and cylinder versions of the Selector.
Diagrams illustrating the gas flow paths for both Selector versions.
Prerequisites and initial considerations before installing the Selector.
Step-by-step instructions for installing the bag version.
Environment and material needs for installation.
Step-by-step instructions for installing the cylinder version.
Settings for defining analysis parameters in the Selector.
Steps for setting up automated sequences with the Selector.
General steps for operating the Gas Sample Selector.
Procedure for replacing the gas filter in the bag version.
Procedure for replacing the gas filter in the cylinder version.
List of instrument alerts, symptoms, and troubleshooting guidance.
Procedures to check for system restrictions and leaks.
To Next Page
