Need help?Do you have a question about the Agilent Technologies 8890 and is the answer not in the manual?
General| Type | Gas Chromatograph |
|---|---|
| Temperature Range | Ambient +4 °C to 450 °C |
| Oven Temperature Range | Ambient +4 °C to 450 °C |
| Temperature Programming Rates | Up to 120 °C/min |
| Cool Down Time | 450 °C to 50 °C in < 4.5 min |
| Oven Temperature Programming Ramps/Plateaus | 20 ramps/plateaus |
| Carrier Gas | Helium, Hydrogen, Nitrogen |
| Detectors | FID, TCD, ECD, NPD, FPD, MS |
| Inlet Options | Split/Splitless |
| Communication | LAN, USB |
| Data Handling | Agilent OpenLab CDS, MassHunter |
| Power Requirements | 230 V ac ± 10 %, 50/60 Hz |
Step-by-step guide for powering on and preparing the GC.
Procedure for safely powering down the GC for short-term storage.
Step-by-step guide to creating a new GC method.
Procedures for initiating and managing GC runs.
Step-by-step guide to executing diagnostic tests.
Tracking consumable usage and scheduling maintenance.
Accessing guided procedures for common maintenance tasks.
Setting up inlet parameters like carrier gas type.
Defining column parameters and connections.
Setting up detector parameters, including makeup gas.
Creating instrument schedules for resource conservation.
Steps to prepare the GC for performance verification.
Procedure for verifying Flame Ionization Detector performance.
Procedure for verifying Thermal Conductivity Detector performance.
Procedure for verifying Nitrogen-Phosphorus Detector performance.
Procedure for verifying Electron Capture Detector performance.
To Next Page
