1 Getting Started
Operation Manual 31
Correcting Problems
If the GC stops operation because of a fault, check the touchscreen or Browser Interface for
any messages. The GC includes diagnostics functions to help you determine the cause of a
fault.
1 Use the touchscreen, Browser Interface, or data system to view the alert. (See “Home
View” and “Diagnostics” for details.)
2 Tap the stop button on the touchscreen, click the stop button on the Browser Interface,
or turn off the offending component in the data system.
3 Diagnose the problem using the built in diagnostics tools on the GC. See “Diagnostics”.
4 Resolve the problem by, for example, changing gas cylinders or fixing the leak.
Once the problem is fixed, you may need to power cycle the instrument. Most shutdown errors
can be cleared from the LUI, but some may require a power cycle.
To Next Page
Loading...
Need help?
General
