Operation Manual 269
18[[[] Chinese Metrology Testing]
[[[[FPD+ and ECD Unit Conversion Factors 270]]]
[[[Conversion factors for the FPD+ 270]]
[[Conversion factor for the ECD 270]]
[[Using the Conversion Factors 272]]
[[References 273]]]
[The 8890 GC complies with the following company standard:
Q31/0115000033C005-2016-02.]
[China Metrology testing of the 8890 GC is performed in accordance with company standard
Q31/0115000033C005-2016-02. This chapter provides information and techniques to
correctly identify noise and drift when testing an FPD+[] or ECD.]]
To Next Page
Loading...
