Need help?Do you have a question about the Agilent Technologies SureCycler 8800 and is the answer not in the manual?
General| Block Capacity | 96-well |
|---|---|
| Temperature Accuracy | ±0.25°C |
| Temperature Uniformity | ±0.4 °C at 55 °C |
| Weight | 10 kg (22 lb) |
| Display | LCD |
| Interface | RS-232 |
| Dimensions | 26 cm x 47 cm x 24 cm |
| Power Requirements | 100–240 V, 50/60 Hz |
| Control Type | Microprocessor controlled |
| Sample Capacity | 96 x 0.2 mL tubes |
Lists all parts included with the SureCycler 8800 instrument.
Details electrical, fluid, burn, and environmental safety guidelines for instrument use.
Explains the status codes indicated by the instrument's LED light.
Introduces the SureCycler 8800's capabilities and software interface.
Provides contact information for technical assistance via email, web, and phone.
Step-by-step guide for setting up the SureCycler 8800 instrument.
Instructions for removing and installing interchangeable thermal block units.
Guidelines for preparing and loading samples into the SureCycler 8800.
Lists compatible PCR plates, tubes, and sealing films for the instrument.
Instructions for powering on and interacting with the instrument's software interface.
Explains access levels, logging in, and managing user accounts for the instrument.
Details on configuring network settings and accessing the cycler remotely.
How to configure instrument settings like hot top, name, and time/date.
Methods for creating new PCR programs manually or using the Program Wizard.
Advice for optimizing PCR program creation on the 384-well block.
Explanation of various program steps like Hot Start, Cycle Wizard, etc.
How to use and modify pre-existing PCR programs.
Procedures for modifying existing PCR program parameters and steps.
Steps to start, stop, or pause a PCR program execution.
How to set up and run single-temperature incubations on the instrument.
How to access, view, and delete GLP reports generated by PCR programs.
Common issues and recommended solutions for the SureCycler 8800.
Procedures for cleaning the instrument and replacing a fuse.
Instructions for downloading and installing new software versions for the instrument.
To Next Page
