5 Maintenance and Updates
Maintenance
62 Agilent SureCycler 8800 Setup and User’s Guide
Maintenance
Cleaning
The SureCycler 8800 is designed to require a minimum amount of
maintenance by the user.
• Use water or isopro
pyl alcohol to clean the instrument.
• Do not let organic solvents or aggressive
solutions come in contact with
the instrument.
• Do not let liquid enter
the instrument.
• Turn off and disconnect the instrument from the power supply before
you c
lean.
Replacing a fuse
Fuse compartments are located on the rear of the instrument, above the
main power connection. Check the voltage rating label to verify that the
instrument is compatible with the AC voltage available at the installation
site. Check that fuses are rated as T 10A, 250V.
Disconnect the power cord before you remove or install a fuse to avoid the
possibility of serious injury from electrical shock.
To Next Page
Loading...
