Getting Started 3
Network Settings and Remote Access
Agilent SureCycler 8800 Setup and User’s Guide 29
Network Settings and Remote Access
To view or edit the cycler’s IP address and name
1 From the Home screen, press Settings. You will be directed to the
Settings screen.
2 On the Settings screen, press LA
N Settings. If the instrument is
connected to a network, the LAN Settings screen displays the IP
address, the subnet mask, the default gateway and the DHCP server.
You have the option of obtaining an IP address automatically or
assignin
g one manually.
• If you select the option Obta
in an IP Address automatically, the
fields for network information are unavailable.
• If you select the option Use Manual Conf
iguration, these fields are
editable and you can enter the desired information. If you do edit
the network information, press OK to save your changes.
Once logged in, you have control of the cycler from the PC using the
web-
based SureCycler 8800 software. Note that some of the screens of
the web- based software differ slightly from the version of the software
installed on the instrument.
To Next Page
Loading...
Need help?
General
