3Getting Started
To access the cycler from another cycler
30 Agilent SureCycler 8800 Setup and User’s Guide
To access the cycler from another cycler
1 From the Home screen, press Network Control.
2 Press any of the six “Touch to Connect” squares on the screen.
A new screen will open.
3 Enter the IP address or cycler name of the instrument you want to
con
nect to into the IP Address/Cycler field.
4 Press Connec
t. You will be returned to the Network Control screen and
the network information and status of the connected instrument will be
displayed in the square.
5 Press the square for the connected instrument. You will be prompted to
login to t
he instrument.
6 Enter a valid User Name and Password to take over control of the
instrument remotely and press Log In. You are now operating the
software for the remotely connected instrument.
To Next Page
Loading...
