4PCR Programs
To copy a PCR step
54 Agilent SureCycler 8800 Setup and User’s Guide
To copy a PCR step
1 Go to the programming screen for the program.
2 In the Program Window, press the step to be copied to select it.
3 Press the copy button (shown below).
To add or delete a PCR step
• Go to the programming screen for the program, then:
• To add a new step, press a command on the Command List to select
it and th
en press the forward arrow button. You will be prompted to
enter the parameters for the new step. See “Program Steps in the
Commands List” on page 43 for details on parameters for a
particular command.
• To delete a step from the program, press the command in the
Pro
gram Window to select it and then press the delete button (shown
below).
• To save your changes to the program, press Save. You can save the
program under the existing name or give the file a new name.
To delete a PCR program
1 From the Home screen, press Programs.
Depending on your user level (Guest or registere
d user), the specific
user directory or Guest directory is displayed listing all existing PCR
program files.
2 Press the program to be deleted to select it.
3 Press Delet
e to remove the program from the folder.
To Next Page
Loading...
Need help?
General
