1 Before You Begin
Materials Provided
10 Agilent SureCycler 8800 Setup and User’s Guide
Materials Provided
*The thermal block units are sold separately as part numbers G8810A (96-well block)
and G8820A (384-well block).
Safety Precautions
Electrical
Standard electrical safety precautions should be applied, including the
following:
• Always put the instrument in a location where, if needed, the power
supply
can be immediately disconnected.
• Proper voltage must be supplied before you turn on the instrument for
the f
irst time.
• The device must be connected to a grounded socket.
• Do not to
uch an
y switches or outlets with wet hands.
• Turn off the instrument before you disconnect the power cord.
• Unplug the instrument before you clean any major liquid spills and
be
f
ore you service any of the electrical or internal components or swap
out the thermal block.
• Do not operate the instrument from a power outlet that has no ground
connection.
Tab
le 1 Materi
als Provided
Part Quantity
SureCycler 8800 instrument base 1
Thermal block unit (96-well or 384-well)* 1
Power cord 1
Functional test certificate 1
Quick Start installation poster 1
CD with Setup and User’s Guide PDF 1
To Next Page
Loading...
Need help?
General
